|
|
Virtual Prototype of Electrical Machines in ADAMS
Lysák, Jan ; Hadaš, Zdeněk (referee) ; Vetiška, Jan (advisor)
The following thesis deals with the methodology of mechatronic systems design using virtual prototypes. Virtual prototype contains a computer simulation model, whose behaviour represents a physical prototype system. This approach allows to obtain knowledge about the behavior of the developed product before it‘s manufacturing. This leads to shortening new product innovation cycle and lowering the cost of innovation. The first part contains a brief search study of electrical machinery and description of the virtual prototyping. Then the prototypes of electric drives are created, that can be implemented into the more complex machine systems. The work also includes the realization of co-simulation and control design for one of the drives.
|
|
|
Simulation of the 5th car door mechanism
Taušek, Martin ; Škoda, Jan (referee) ; Hadaš, Zdeněk (advisor)
This bachelor thesis deals with simulation of the 5th car door mechanism. The simulation runs in MSC.ADAMS software in which was made simulation model. The model contains several bodies which needed to have the same mechanical parameters as the CAD model of the real 5th door so the simulation was accurate. The opening of door is done by two gas springs, one on each side. These gas springs had to be correctly dimensioned to achieve fully opened door and safety movement as well. The thesis also deals with kinematic and dynamic analysis of the mechanism.
|
|
|
Simulation Assessment of X Axis Damping Possibilities of Heavy Machine Tool
Štetina, Jakub ; Marek, Jiří (referee) ; Březina, Tomáš (advisor)
This master's thesis deals with the simulation assessment of axis X damping possibilities of Heavy Machine Tools. CAD model has been provided by company TOSHULIN a.s. In the thesis, there is described modelling of axis X as multi body system consisting of rigid and flexible bodies. The main goal is to create simplified model and get the information for strategic decision of manufacturer about damping possibilities of axis X. For the solution has been used several software products: SolidWorks 2013 - for simplifying the CAD models, Ansys 14.5. for modelling od flexible bodies, MSC.Adams for modelling multi body systems and Matlab 2012 for data processing and optimization.
|
|
|
Simulation verify the dynamic behavior of the portal machine tool
Danda, Libor ; Holub, Michal (referee) ; Vetiška, Jan (advisor)
This bachelor thesis deals with summary of simulation software for the simulation of the dynamic behavior of machines, creating a simulation model of the machine in MSC.ADAMS and experimental measurement of cutting forces. It also deals with dynamics simulations axis motion and deformation analysis of selected components of the machine. Finally, they are designed to be structural adaptations in order to increase the dynamic stability of the machine.
|
|
|
Trailer frame VARIANT 200 for transport cabel spools
Blažek, Jaroslav ; Kašpárek, Jaroslav (referee) ; Kašpárek, Jaroslav (advisor)
The aim of this thesis is an analysis of the construction of a cable trailer VARIANT 200. For the calculation of load states was used a multi body system in program MSC.ADAMS. The results from these calculations were used as lifting conditions for strength control with finite element method (FEM). All acquired results were analysed and according to them changes were made to the frame construction. Part of this thesis contains drawings documenting the above mentioned changes.
|
|
|
Virtual prototype of mechatronic system
Dinga, Milan ; Březina, Lukáš (referee) ; Hadaš, Zdeněk (advisor)
This thesis deals with modeling of delta 3D printer virtual prototype and its co-simulation using software ADAMS and MATLAB/SIMULINK. The first part consists of virtual model creation and its kinematic analysis. Then a model of electric motors is created. The final part consists of co-simulation and control design.
|
|
|
Virtual prototype of mechatronic system
Dinga, Milan ; Březina, Lukáš (referee) ; Hadaš, Zdeněk (advisor)
This thesis deals with modeling of delta 3D printer virtual prototype and its co-simulation using software ADAMS and MATLAB/SIMULINK. The first part consists of virtual model creation and its kinematic analysis. Then a model of electric motors is created. The final part consists of co-simulation and control design.
|
|
|
Virtual prototype of mechatronic system
Dinga, Milan ; Březina, Lukáš (referee) ; Hadaš, Zdeněk (advisor)
This thesis deals with modeling of delta 3D printer virtual prototype and its co-simulation using software ADAMS and MATLAB/SIMULINK. The first part consists of virtual model creation and its kinematic analysis. Then a model of electric motors is created. The final part consists of co-simulation and control design.
|
|
|
Simulation of the 5th car door mechanism
Taušek, Martin ; Škoda, Jan (referee) ; Hadaš, Zdeněk (advisor)
This bachelor thesis deals with simulation of the 5th car door mechanism. The simulation runs in MSC.ADAMS software in which was made simulation model. The model contains several bodies which needed to have the same mechanical parameters as the CAD model of the real 5th door so the simulation was accurate. The opening of door is done by two gas springs, one on each side. These gas springs had to be correctly dimensioned to achieve fully opened door and safety movement as well. The thesis also deals with kinematic and dynamic analysis of the mechanism.
|
|
|
Virtual prototype of mechatronic system
Dinga, Milan ; Březina, Lukáš (referee) ; Hadaš, Zdeněk (advisor)
This thesis deals with modeling of delta 3D printer virtual prototype and its co-simulation using software ADAMS and MATLAB/SIMULINK. The first part consists of virtual model creation and its kinematic analysis. Then a model of electric motors is created. The final part consists of co-simulation and control design.
|
guest ::
